We design, fabricate and erect steel portal frame buildings for Buckinghamshire from our own Banbury workshop, with one team carrying every project from the first survey drawing to the final bolt. Buckingham itself sits close to us, and the rest of the county, from Aylesbury to the Milton Keynes area, is a manageable run for a site visit, so a Buckinghamshire steel frame job gets the same in-house attention as one nearer home.
The buildings we frame in Buckinghamshire
A portal frame is a series of steel columns and rafters bolted into rigid frames along the length of a building, which is what gives it a clear span with no internal posts breaking up the floor. That structural system covers most of what we build in Buckinghamshire:
- Industrial units and workshops: frames sized for vehicle access, plant loads and clear working height, from single-bay units to multi-bay sites
- Agricultural and equestrian buildings: barns, machinery stores and livestock housing, plus equestrian steel buildings such as stables and indoor arenas where a wide, unobstructed span matters
- Commercial and retail units: trade counters, showrooms and light industrial premises framed to suit the fit-out
- House frames and extensions: a steel frame opens up a footprint that timber or block cannot span on its own
- Mezzanine floors inside existing units, adding usable floor area without a new building footprint
Section sizes and grades, typically S275 or S355 steel to the engineer’s design, and clear spans commonly running from 12 to 30 metres for a single-span portal frame, are set by structural calculation rather than a standard template. Eaves height is chosen for the use, whether that is a forklift aisle or a livestock building, and cladding and roofing are handled by our trade partners or supplied loose for your own team.
How we work across Buckinghamshire
Every Buckinghamshire project follows the same sequence we use everywhere: a site survey to capture real dimensions and access, a structural engineer’s design with section sizes confirmed by calculation, Building Control sign-off where the work requires it, fabrication in our Banbury workshop, and erection by our own team rather than a subcontracted crew. That single-firm route, covered in full as part of our design and build steel building service, is what keeps a Buckinghamshire job on programme, because the people who drew the frame are the ones who bolt it together.
Distance matters for scheduling. Buckingham is roughly 20 to 30 minutes from our workshop, and most of the county sits within about an hour, so on-site installation can be planned tightly around your groundworks rather than a national fabricator’s transport slot. We agree a realistic erection window at survey stage rather than promise a same-day turnaround.
Towns we cover across Buckinghamshire
We take on steel frame projects across the county, including Buckingham, Aylesbury, the Milton Keynes area, High Wycombe, Amersham and Beaconsfield, with larger structural packages taken on UK-wide. If your site is nearer Oxfordshire, our Buckingham and Milton Keynes area pages cover those locations specifically, and our neighbouring Oxfordshire page sits alongside this one on the areas we cover hub.
What to have ready for a quote
A firm quote needs a few basics: the intended use of the building, an approximate footprint or span, any site plan or existing drawings you have, and access details for the site. We use those to scope the survey and give you a realistic sense of cost drivers, set out in our steel frame building cost per m2 guide, before pricing the job properly. If planning or timeline questions come up early, our guides to steel building planning permission and the structural steel project timeline cover what typically applies.
Frequently asked questions
Do you build steel frame buildings in Buckinghamshire, or only in Oxfordshire?
We build across Buckinghamshire as a standard part of our coverage. Buckingham sits close to our Banbury workshop, and most of the county is a straightforward run for a site survey, so a Buckinghamshire steel frame project gets the same in-house design, fabrication and erection as work closer to home.
What kind of steel frame buildings do you fabricate for Buckinghamshire sites?
Industrial units and workshops, agricultural and equestrian buildings, commercial and retail units, house frames and extensions, and mezzanine floors inside existing units. All are designed to the span, height and loadings the site needs and fabricated in our own Banbury workshop.
How far is Buckinghamshire from your workshop, and does that affect the programme?
Buckingham is roughly 20 to 30 minutes from Banbury by road, and most of Buckinghamshire, including Aylesbury and the Milton Keynes area, is within about an hour. That keeps site visits and erection straightforward to schedule, though we agree a realistic programme rather than promise same-day turnaround.
Do you handle Building Control and planning for a Buckinghamshire steel frame building?
We work to a structural engineer’s design and to Building Control requirements on every project, and we can point you to what to expect on the planning side, but the formal planning and Building Control approvals sit with your local authority and, where needed, your engineer. Our guide to steel building planning permission covers the general position.
If you have a Buckinghamshire site in mind, send us the details and we will scope the survey. Get in touch for a free quote.
Frequently asked questions
- Do you build steel frame buildings in Buckinghamshire, or only in Oxfordshire?
- We build across Buckinghamshire as a standard part of our coverage. Buckingham sits close to our Banbury workshop, and most of the county is a straightforward run for a site survey, so a Buckinghamshire steel frame project gets the same in-house design, fabrication and erection as work closer to home.
- What kind of steel frame buildings do you fabricate for Buckinghamshire sites?
- Industrial units and workshops, agricultural and equestrian buildings, commercial and retail units, house frames and extensions, and mezzanine floors inside existing units. All are designed to the span, height and loadings the site needs and fabricated in our own Banbury workshop.
- How far is Buckinghamshire from your workshop, and does that affect the programme?
- Buckingham is roughly 20 to 30 minutes from Banbury by road, and most of Buckinghamshire, including Aylesbury and the Milton Keynes area, is within about an hour. That keeps site visits and erection straightforward to schedule, though we agree a realistic programme rather than promise same-day turnaround.
- Do you handle Building Control and planning for a Buckinghamshire steel frame building?
- We work to a structural engineer's design and to Building Control requirements on every project, and we can point you to what to expect on the planning side, but the formal planning and Building Control approvals sit with your local authority and, where needed, your engineer. Our guide to steel building planning permission covers the general position.